• ™ NetworX Series NX-148E-CF Commercial Fire LCD Keypad User manual. • Installing/Service Company For Service Call Central Station is not partitioned. This system EMERGENCY ACTIVATION KEYS (check if enabled) Fire Auxiliary Emergency Police PROGRAMMED FUNCTIONS Abort Delay (s) Group Bypass (s) Battery Test Quick Arm (s) Cancel Alarm Re Exit Chime Siren Test Forced Arming (s) (s) These features should not be enabled on UL listed systems. • TABLE OF CONTENTS GLOSSARY OF TERMS..4 UNDERSTANDING THE LIGHTS.. 6 KEYPAD FUNCTIONS..7 Arming Your System In The “Away” Mode..

Access Control; Burglar Alarms; CCTV Systems; Fire Alarms. General Electric. GE Concord 4. Alarm Keypad Manuals; Alarm Permit Applications.

7 Making Your System Ready To Arm.. 7 Arming Your System In The “Stay” Mode.8 Using The Quick Arm..9 Disarming Your System.. • THIS MANUAL IS FURNISHED TO HELP YOU UNDERSTAND YOUR SECURITY SYSTEM AND BECOME PROFICIENT IN ITS OPERATION. ALL USERS OF YOUR SECURITY SYSTEM SHOULD READ AND FOLLOW THE INSTRUCTIONS AND PRECAUTIONS IN THIS BOOKLET. FAILURE TO DO SO COULD RESULT IN THE SECURITY SYSTEM NOT WORKING PROPERLY.

• GLOSSARY OF TERMS Abort Delay: An option that allows a delay in reporting to the central station. Authority Level: The level of access an individual has when using an alarm panel. Central Station: Location where alarm data is sent during an alarm report. Chime Feature: An option that allows the keypad to sound a ding-dong whenever an entry/exit door is opened. Toyota Supra Font Download. • UNDERSTANDING THE LIGHTS Armed Light The armed light is “on” when the system is armed. The armed light is “off” when it is disarmed.

The armed light will flash when there has been an alarm during the previous arm cycle. Bypass Light The bypass light is “on”.

• KEYPAD FUNCTIONS ARMING YOUR SYSTEM IN THE “AWAY” MODE AWAY is utilized when the user is going away from the premise and wants the interior protected. Listed below are the steps to arm in the AWAY Mode: Step 1 Close all protected doors and windows. Ready light will be on or flashing when all protected System Ready. • ARMING YOUR SYSTEM IN THE “STAY” MODE STAY is utilized when the user is inside the premise and wants protection around the perimeter. The steps to arm in the STAY Mode are as follows: Step 1 Close all protected doors and windows. Ready light must be on or flashing (force armed) when all protected zones and sensors are secure. • USING THE QUICK ARM The Quick Arm feature may be used if it is enabled.

Quick Arm will allow the user to arm the security system in the AWAY mode by pressing the [EXIT] key. The system can be quick armed in the STAY mode by pressing the [STAY] key.

This feature is used for ARMING ONLY, and will not disarm the security system. • CANCEL / ABORT FEATURE (Optional, if programmed) The cancel light will flash during an abort delay time.

If a code is entered followed by the [CANCEL] key while this light is flashing, all abortable reports will stop the communication process. NOTE: The abort feature must be enabled. Entering a code followed by the [CANCEL] key during or after an alarm report to the central station will cause the cancel light to come on. • If you do not know the number of the zone you wish to bypass, Procedure #2 use the following steps: Press r • Step 1 The description for zone 1 will be displayed. Use the • – scroll keys to browse through the custom descriptions Step 2 for the zones in this system. • Auxiliary Key - If programmed, you can activate the auxiliary alarm by pressing the Emergency Activation [Auxiliary] key for two seconds.

If your system is connected to a monitoring center, an emergency report could be sent to that center. This key should only be pressed in an emergency situation requiring response by emergency personnel. • VIEW ZONE STATUS Step 1 Press r •.

The LCD Screen will display the zone status. Step 2 Use the • – scroll keys to browse through the descriptions. The LCD Screen will display the list of all zones in sequential order by zone number. Step 3 Press [#] to exit this function.

• DISPLAY TEST FUNCTION This function will perform a test of the LCD display. Auto Bcc Keygen Idm. No alarms or reports will be sent.

Step 1 Press r 5. The test will be performed and all of the display pixels and LED indicators will flash until another key is pressed. Step 2 Press any key to end the test. • CHANGING USER CODES Press r Step 1 5. The LCD Screen will prompt for a code.

Step 2 Enter [master code]. The LCD Screen will prompt for a user number. NOTE: For partitioned systems, if you are changing the code of another person, you must have access to all partitions, or at least all of the partitions to which the other person has access. • PROMPT » DO NOT CHANGE THIS SEGMENT! Outputs used? Open / Close Rprt? (These are for use by a professional installer only.) Bypass enable?

Arm / Disarm? 0=No 1=Yes Sched arm only? Your keypress will apply to the user code you entered in Arm only? • READING THE EVENT LOG The control panel has an event log that can be retrieved using a master code. This log contains a listing of the events along with date, time, and partition where the event occurred.