The 3500SS Bernard® or CE3502SS Weldcraft® water coolers have been discontinued by Miller® so they can sell their more expensive models. ***SEE THIS PAGE FOR. Craftsman Staple Gun 68514 Manual more. Replacement tig and mig water cooler for 2500SS & 3500SS Bernard cooler is the Nu-Tec® NWC2500 2.4-Gallon (9L). Bernard water cooler replacement.

Guys, Some time ago, as in 'way back when Moses was a boy', I acquired a Bernard TIG cooler along with a welder I bought. I have only now found a need for it. It is a model 3500SS cooler. I believe it's rated for up to 500 amps. A few days ago, I started cleaning it up, and finished the project only today. I blew copious, billowing clouds of black dust out of the radiator fins, then scrubbed the outside with Simple Green, then rinsed with clear water.

I then opened the tank. It had a couple of cups of dried nasty black dusty powder inside the tank. I got the tank squeaky clean then closed it up. After washing, scrubbing, and blowing everything dry with compressed air, I filled the tank with 3 gallons of distilled water. However, upon attempting a test run with none of the lines hooked up to the welder, I was unable to get the pump to deliver any flow. I have found a Bernard manual of sorts on the internet, but it's only about 3 pages long and is short on details.

The unit has a TEEL brand rotary vane pump. Senor Coconut El Baile Aleman Rar on this page. The pump's intake (suction) hose sticks down through a hole through the top of the tank down into the water reservoir. It's a straight up lift of not more than 6 inches into the pump. However, it will not deliver any flow.